Lancom Systems 61724 Ficha de datos descargar pdf (Pagina 6)

Routing functions

HTTP and HTTPS server for configuration by web interfaceHTTP

DNS client, DNS server, DNS relay, DNS proxy and dynamic DNS clientDNS

DHCP client, DHCP relay and DHCP server with autodetection. Cluster of several LANCOM DHCP servers per context (ARF network) enables caching

of all DNS assignments at each router. DHCP forwarding to multiple (redundant) DHCP servers

DHCP

NetBIOS/IP proxyNetBIOS

NTP client and SNTP server, automatic adjustment for daylight-saving timeNTP

Policy-based routing based on routing tags. Based on firewall rules, certain data types are marked for specific routing, e.g. to particular remote

sites or lines

Policy-based routing

Dynamic routing with RIPv2. Learning and propagating routes; separate settings for LAN and WAN. Extended RIPv2 including HopCount, Poisoned

Reverse, Triggered Update for LAN (acc. to RFC 2453) and WAN (acc. to RFC 2091) as well as filter options for propagation of routes. Definition

of RIP sources with wildcards

Dynamic routing

DHCPv6 client, DHCPv6 server, DHCPv6 relay, stateless- and stateful mode, IPv6 address (IA_NA), prefix delegation (IA_PD), DHCPv6 reconfigure

(server and client)

DHCPv6

Layer 2 functions

Packets sent in response to LCOS service requests (e.g. for Telnet, SSH, SNTP, SMTP, HTTP(S), SNMP, etc.) via Ethernet can be routed directly to the

requesting station (default) or to a target determined by ARP lookup

ARP lookup

Automatic discovery of network topology in layer 2 networks (Link Layer Discover Protocol).LLDP

COM port server

COM-port server for the DIN interface. For a serial device connected to it, the server manages its own virtual COM port via Telnet (RFC 2217) for

remote maintenance (works with popular virtual COM-port drivers compliant with RFC 2217). Switchable newline conversion and alternative binary

mode. TCP keepalive according to RFC 1122 with configurable keepalive interval, retransmission timeout and retries

COM port forwarding

LAN protocols

ARP, proxy ARP, BOOTP, DHCP, DNS, HTTP, HTTPS, IP, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RIP-1, RIP-2, RTP, SIP, SNMP, TCP, TFTP,

UDP, VRRP, VLAN

802.1d Spanning Tree and 802.1w Rapid Spanning Tree support for dynamic path selection with redundant layer 2 connectionsRapid Spanning Tree

NDP, stateless address autoconfiguration (SLAAC), stateful address autoconfiguration (with DHCPv6), router advertisements, ICMPv6, DHCPv6,

DNS, HTTP, HTTPS, PPPoE, TCP, UDP

IPv6

IPv4/IPv6 dual stackDual Stack

WEBconfig, HTTP, HTTPS, SSH, Telnet, DNS, TFTP, FirewallIPv6 compatible LCOS applications

WAN protocols

PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1, RIP-2, VLAN, IPEthernet

IPv6 over PPP (IPv6 and IPv4/IPv6 dual stack session), IPoE (autoconfiguration, DHCPv6 or static)IPv6

6to4, 6in4, 6rd (static and via DHCP)Tunneling protocols (IPv4/IPv6)

WAN operating mode

ADSL1, ADSL2 or ADSL2+ with external ADSL2+ modemxDSL (ext. modem)

Interfaces

10/100/1000 Base-T, autosensing, auto node hub, PoE compliant with IEEE 802.3af. The port supports energy saving according to IEEE 802.3azETH1 (PoE)

10/100/1000 Base-T, default LAN port, configurable as WAN port. The port supports energy saving according to IEEE 802.3azETH2

One LAN port can (even parallel to LAN mode) be used as a WAN port for connecting external DSL modems (PPPoE) or external routers.DSL over LAN (DSLoL)

Serial configuration interface / COM port (8 pin Mini-DIN): 9,600 - 115,000 baud, suitable for optional connection of analog/GPRS modems. Supports

internal COM port server and allows for transparent asynchronous transmission of serial data via TCP

Serial interface

Five reverse SMA connectors for external LANCOM AirLancer Extender antennas or for antennas from other vendors. Please respect the restrictions

which apply in your country when setting up an antenna system. For information about calculating the correct antenna setup, please refer to

www.lancom-systems.com

External antenna connectors

Radio module 2 uses one internal antenna (WLAN 2 Ant 3).Internal antenna

LANCOM L-452agn dual Wireless

Features as of: LCOS 8.84

1 2 3 4 5 6 7 8 9

LANCOM L-452agn dual Wireless 1

Comentarios a estos manuales

Sin comentarios

Lancom Systems 61724 Ficha de datos Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Puntos de acceso wlan Lancom Systems 61724